Operating Procedures For Configuration Utility - NEC Express5800 User Manual

Operating Procedures for Configuration Utility

Creating/Adding Configuration
Set new configuration information (pack/virtual drive settings)
1.
Run LSI Software RAID Configuration Utility.
2.
Select "Configure" → "New Configuration" from the TOP menu (Management Menu).
Select "View/add Configuration" to add configuration.
IMPORTANT:
Creating a configuration using "New Configuration" menu clears

the existing configuration information. To add configuration
information to the existing configuration, select "View/add
Configuration."
You cannot create Striping of RAID1 or set the virtual drive

capacity on "Easy Configuration" menu.
Use "New Configuration" or "View/Add Configuration" instead.
Run LSI Software RAID Configuration Utility
Check the virtual drive settings
Initialize virtual drive
Perform Consistency Check
Exit LSI Software RAID Configuration Utility
Configuring Your Server 4-49