Inch Hard Disk Drive (In N8154-24 2.5-Inch Disk Cage) - NEC Express5800 User Manual

2.5-inch Hard Disk Drive (in N8154-24 2.5-inch Disk Cage)

The 2.5-inch disk cage (N8154-24) may contain up to eight hard disk drives.
IMPORTANT:
Use the hard disk drives authorized by NEC. Installing a third-party

hard disk drive may cause a failure of the server as well as the hard
disk drive. Purchase hard disk drives of the following models:
– N8150-300 (146.5GB, 10,000rpm, SAS)
– N8150-301 (300GB, 10,000rpm, SAS)
– N8150-322 (450GB, 10,000rpm, SAS)
– N8150-304 (600GB, 10,000rpm, SAS)
– N8150-302 (73.2GB, 15,000rpm, SAS)
– N8150-303 (146.5GB, 15,000rpm, SAS)
– N8150-276 (160GB, 7,200rpm, SATA2/300)
– N8150-277 (500GB, 7,200rpm, SATA2/300)
– N8150-702 (50GB, SSD)
Refer to the manual that comes with WebBIOS or Universal RAID

Utility for how to configure the RAID System.
All the hard disk drives in the specific cage must be of the same

specification.
A hard disk drive having the thickness of 0.6-inch (15 mm) can be installed on each of the slots. The
port numbers PORT0 to PORT7 are assigned from right to left.
Installing an additional 2.5-inch disk cage (N8154-24) allows the server to be equipped with up to
16 hard disk drives. The port numbers for additional 2.5-inch disk cage are assigned as PORT8 to
PORT15 from right to left. To connect an additional 2.5-inch disk cage, you need an additional
RAID controller.
Slot for additional
2.5-inch disk cage
2.5-inch disk cage
PORT7
PORT6
7 6 5
PORT5 PORT4 PORT3
Upgrading Your Server 9-17
4 3 2 1 0
PORT2
PORT0
PORT1