9-66 Upgrading Your Server
The system searches for the PCI board in the following order:
PCI #1 → PCI #2 → PCI #3 → PCI #4 → PCI #5 → PCI #6
Set "Disabled" for the Option ROM Scan of the PCI slot connected with non-bootable device by
using BIOS SETUP utility. Disabling Option ROM Scan saves memory consumption and time for
startup.
NOTE:
PCI boards are installed.
ERROR
Expansion ROM not initialized – PCI Mass Storage
Controller in slot xx (xx: slot number)
Change setting in [Advanced] → [PCI Configuration] of BIOS SETUP.
Onboard LAN Controller Considerations
It is possible to configure the Teaming feature of AFT (Adapter Fault Tolerance)/ALB (Adaptive
Load Balancing) with the onboard LAN controllers. But it is impossible to configure the Teaming
function of the same AFT/ALB with the onboard network controller and an optional LAN board.
The following message may be displayed on POST if many