Optical Disk Drive - NEC Express5800 User Manual

Optical Disk Drive

You may replace the factory-installed optical disk drive with an optional DVD SuperMULTI drive.
IMPORTANT:
by NEC.
Replacement Procedure
Take the following steps to install the optional DVD SuperMULTI drive.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the side cover.
3.
Release the lock of the front door by using the security key and open the front door.
4.
Disconnect the interface and power cables from the factory-installed optical disk drive
from one side of the server.
5.
Remove the two screws from the front of optical disk drive.
6.
Pull out the factory-installed optical disk drive.
Be sure to use the DVD SuperMULTI drive authorized
Upgrading Your Server 9-61