Turning On The Server - NEC Express5800 User Manual

3-8 Setting Up Your Server

TURNING ON THE SERVER

Turn on the server and follow the on-screen instructions for setup.
1.
Power on the display unit and other external devices.
NOTE:
as the UPS, turn on the power control unit.
2.
Open the front door and press the POWER/SLEEP switch.
The POWER/SLEEP lamp on the front of the server comes on.
POWER/SLEEP lamp
NOTES:
Connect the power cord and wait at least 10 seconds before pressing

the POWER/SLEEP switch. The Status lamp lights thin amber
immediately after the power cord is connected or AC power is
supplied to the server. Wait until the lamp goes off, then press the
POWER/SLEEP switch.
Do not power off the server before some characters appear on the

screen.
If the power cord is connected to the power control unit such