24.
Connect the power cable, SAS/SATA cables, and SGPIO cable to the rear of the 2.5-inch
disk cage, as shown in the figure below.
RAID Controller
SAS/SATA cable
SAS/SATA connectors
Power connectors
– SAS/SATA cable
Connect the SAS/SATA cable from the farther connector on rear of the 2.5-inch disk
cage with the right connector on the RAID Controller. Connect another SAS/SATA
cable from the nearer connector with the left connector on the RAID Controller.
– SGPIO cable
Connect the SGPIO cable with SGPIOA connector on mother board.
SGPIO cable
SGPIO cable
Upgrading Your Server 9-53
Power cable