NEC Express5800 User Manual page 357

Installation
Install a hard disk drive in the following procedure. A hard disk drive may be installed in any other
slot in the similar procedure.
IMPORTANT:
Fill the bays right-to-left.

In the RAID System, hard disk drives should have the same

specification including the capacity.
NOTE:
only by opening the front door. In the RAID System, hard disk drives
may be installed or removed with the power of the server being on.
1.
Release the lock of the front door by using the security key to open the front door.
2.
Locate the slot in which the hard disk drive is installed.
There are eight slots. The port numbers are defined depending on the locations of the slots
(PORT0 to PORT7 from right to left).
3.
Hold the handle of the dummy tray and remove the dummy tray.
IMPORTANT:
dummy tray is to increase the cooling effect in the server. Install a
dummy tray in slots not containing a hard disk drive.
Hard disk drives can be installed or removed from the server
Keep the dummy tray carefully. The purpose of a
Upgrading Your Server 9-19