NEC Express5800 User Manual page 456

D-10 Installing Windows Server 2008 R2
8.
Select the type of installation you want.
[Custom (advanced)] is selected below.
9.
The screen of "Where do you want to install Windows?" is displayed.
NOTE:
Remove the Backup DVD-ROM or Windows Server 2008 R2 DVD-ROM and set NEC
EXPRESSBUILDER DVD, and select [Load Driver].
Load Driver
hard drive, insert the installation media containing the
driver files, and then click OK.
CD, DVD, or USB flash drive.
Click [Browse], and go to Step 10.
Please go to step 12 when you do not use the RAID Controller.
To install the device driver needed to access your
NOTE: The installation media can be a floppy disk,
[Browse] [OK] [Cancel]