NEC Express5800 User Manual page 92

4-22 Configuring Your Server
For details about the options, see the following table.
Security settings can be specified in the submenu that opens by selecting [Security Configuration]
and pressing Enter.
Option
Password
Configuration
Administrator
Password
User Password
Security
Configuration
Password On Boot
Disable USB Ports
Trusted Computing
Parameter
–
Up to 20
alphanumeric
characters
Up to 20
alphanumeric
characters
–
[Disabled]
Enabled
[Disabled]
Front
Rear
Internal
Front + Rear
Front + Internal
Rear + Internal
Front + Rear +
Internal
Description
When the Enter key is pressed, the
administrator password entry screen is
displayed. This password can be used to access
all setup menus. This setting can only be
specified by logging in as an administrator when
starting up the setup utility.
When the Enter key is pressed, the user
password entry screen is displayed. This
password can only be used to access certain
setup menus. This setting can only be specified
by logging in as an administrator when starting
up the setup utility.
Specify whether to enable or disable password
entry on boot. An administrator password must
be specified in advance. If an administrator
password is specified and this option is set to
[Disabled], BIOS is judged to have been started
up by a normal user.
Specify whether to enable or disable the USB
ports.
–
–
[ ]: Factory-set