NEC Express5800 User Manual page 394

9-56 Upgrading Your Server
7.
Connect the power cable, SAS/SATA cables, and SGPIO cable to the rear of the 2.5-inch
disk cage.
– SAS/SATA cable
Connect the SAS/SATA cable from the farther connector on rear of the 2.5-inch disk
cage with the connector on the optional RAID controller. Connect another
SAS/SATA cable from the nearer connector with the connector on the other optional
RAID controller.
– SGPIO cable
Connect the SGPIO cable with SGPIOB connector on mother board.
SAS/SATA connectors
8.
Install the components having been removed.
Removal
Remove the disk cage in the reverse procedure of the installation.
SGPIO connector
Power connectors