Executing Rebuilding Manually - NEC Express 5800 Series Maintenance Manual

Chapter 2 Useful Features
5.3.2

Executing rebuilding manually

1. Replace the hard disk drive and turn on the server.
2. Run the LSI Software RAID Configuration Utility.
3. Select Rebuild from the TOP menu.
The Rebuild - PHYSICAL DRIVES SELECTION MENU screen appears.
4. Move the cursor to a hard disk drive indicated by "FAIL", and then press the space key to select it.
The "FAIL" of the selected drive turns pink.
5. Press <F10> key after selecting the hard disk drive.
6. To start the rebuilding the selected drive, choose Yes at the confirmation message.
Rebuilding completes when the "Completed" progress bar on the REBUILDING screen reaches 100%.
7. Press <Esc> key to return to the TOP menu screen, and then exit the LSI Software RAID Configuration
Utility.
110
Replace the hard disk drive
Run the LSI Software RAID Configuration Utility
Execute rebuilding
Exit the LSI Software RAID Configuration Utility
Rebuild – PHYSICAL DRIVES SELECTION MENU
PORT #
ONLINE A00-00
0
FAIL
1
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
A00-01
5. RAID System Configuration