NEC Express 5800 Series Maintenance Manual page 135

Chapter 3 Appendix
Error Message
B004 Expansion ROM not
initialized - PCI Slot 4
(Express5800/T110f-S,
T110f-E)
B01A Expansion ROM not
initialized - PCI Slot 1A
(Express5800/R110f-1E)
B01B Expansion ROM not
initialized - PCI Slot 1B
(Express5800/R110f-1E)
B022 Serial Port Configuration
Overlapped.
B200 Onboard VGA - PCIe Link
Failure
B201 Onboard LAN 1 - PCIe Link
Failure
B202 Onboard LAN 2 - PCIe Link
Failure
B211 PCI Slot 1 - PCIe Link
Failure
(Express5800/T110f-S,
T110f-E)
B212 PCI Slot 2 - PCIe Link
Failure
(Express5800/T110f-S,
T110f-E)
B213 PCI Slot 3 - PCIe Link
Failure
(Express5800/T110f-S,
T110f-E)
B214 PCI Slot 4 - PCIe Link
Failure
(Express5800/T110f-S,
T110f-E)
B21A PCI Slot 1A - PCIe Link
Failure
(Express5800/R110f-1E)
B21B PCI Slot 1B - PCIe Link
Failure
(Express5800/R110f-1E)
B221 Onboard LAN 1 - PCIe Link
Width Error
B222 Onboard LAN 2 - PCIe Link
Width Error
B231 PCI Slot 1 - PCIe Link
Width Error
(Express5800/T110f-S,
T110f-E)
B232 PCI Slot 2 - PCIe Link
Width Error
(Express5800/T110f-S,
T110f-E)
B233 PCI Slot 3 - PCIe Link
Width Error
(Express5800/T110f-S,
T110f-E)
B234 PCI Slot 4 - PCIe Link
Width Error
(Express5800/T110f-S,
T110f-E)
Description
Option ROM expansion in PCI
slot 4 failed.
Option ROM expansion in PCI
slot 1A failed.
Option ROM expansion in PCI
slot 1B failed.
Overlapping serial port
configuration was detected.
A PCIe bus connection failure
was detected by the onboard
VGA controller.
A PCIe bus connection failure
was detected on the onboard
LAN1 port.
A PCIe bus connection failure
was detected on the onboard
LAN2 port.
A PCIe bus connection failure
was detected in PCI slot 1.
A PCIe bus connection failure
was detected in PCI slot 2.
A PCIe bus connection failure
was detected in PCI slot 3.
A PCIe bus connection failure
was detected in PCI slot 4.
A PCIe bus connection failure
was detected in PCI slot 1A.
A PCIe bus connection failure
was detected in PCI slot 1B.
A PCIe bus link width error was
detected on the onboard LAN1
port.
A PCIe bus link width error was
detected on the onboard LAN2
port.
A PCIe bus link width error was
detected in PCI slot 1.
A PCIe bus link width error was
detected in PCI slot 2.
A PCIe bus link width error was
detected in PCI slot 3.
A PCIe bus link width error was
detected in PCI slot 4.
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
1. POST Error Message
Action
If the PCI board does not connect to a
bootable device, disable the Option
ROM Scan for that board.
Run the setup utility, select
Advanced → Serial Port
Configuration, and specify the
different settings for Serial Port A
and Serial Port B.
Contact your sales representative.
(2/4)
135