NEC Express 5800 Series Maintenance Manual page 109

Chapter 2 Useful Features
8. When all settings are specified, choose Accept and then press <Enter> key.
9. Press <ESC> key to close the screen. When the message "Save Configuration?" appears, choose Yes.
10. Press <Esc> key to return to the TOP menu screen.
11. On the TOP menu screen, choose Objects, Virtual Drive, and then View/Update Parameters to check
the virtual drive information.
12. Press <Esc> key to return to the TOP menu screen, and then choose Initialize.
13. On the Virtual Drives screen, use the arrow keys to move the cursor to the virtual drive to be initialized,
and then press the space key.
The virtual drive is selected.
14. Press <F10> key.
15. To start the initialization of the selected virtual drive, choose Yes at the initialization confirmation
message.
The initialization completes when the "Completed" progress bar on the "Init Of VD Is In Progress" screen
reaches 100%. Press <Esc> key to return to the TOP menu screen.
16. Execute the consistency check process at the virtual drive for RAID1/RAID10 after initialization is
complete.
For details about the consistency check, see Chapter 2 (5.3.4 Executing the Consistency Check).
17. Press <Esc> key to return to the TOP menu screen, and then exit the LSI Software RAID Configuration
Utility.
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
5. RAID System Configuration
109