NEC Express 5800 Series Maintenance Manual page 107

Chapter 2 Useful Features
5. Press <F10> key to specify Select Configurable Array(s), and then press the space key.
"SPAN-1" is set.
SPAN-1
6. Press <F10> key to create a virtual drive.
The Virtual Drive(s) Configured screen is displayed. The following screen shows an example of RAID1
consisting of two hard disk drives. xxx.xxxGB indicates the capacity of the virtual drive.
VD
0
RAID = 1
Units = MB
Size
DWC
RA
Accept
SPAN = NO
Select Configurable Array(s)
A-0
Virtual Drive(s) Configured
RAID Size
1 xxx.xxxGB
Virtual Drive 0
= xxxxxxMB
= Off
= On
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
#Stripes StripeSz
2 64 KB
5. RAID System Configuration
Status
ONLINE
107