Network - NEC Express 5800 Series Maintenance Manual

Chapter 2 Useful Features
2.3.1

Network

The Network menu appears when you select Network on the BMC Configuration menu.
The table below shows details of parameters and their default value.
Item
Property
Management LAN
Connection Type
BMC MAC Address
DHCP
IP Address
Subnet Mask
Default Gateway
Dynamic DNS
DNS Server
Host Name
Domain Name
Network menu
Specify and display LAN port to communicate with BMC. *1 *2
Management LAN
: LAN port for BMC exclusive use.
Shared BMC LAN
: LAN port of System (OS) is shared and used.
Specify and display the connection type of BMC LAN.*1
Auto Negotiation
: Connecting by suitable setting.
100Mbps Full
: Connecting by Full Duplex at speed of 100 Mbps.
100Mbps Half
: Connecting by Half Duplex at speed of 100 Mbps.
10Mbps Full
: Connecting by Full Duplex at speed of 10 Mbps.
10Mbps Half
: Connecting by Half Duplex at speed of 10 Mbps.
MAC Address of BMC is displayed.
Determine whether to dynamically obtain an IP address from a DHCP server. If
the item is set to Enable and applied, BMC set the value obtained from DHCP
server on "IP Address", "Subnet Mask" and "Default Gateway".
Specify the BMC LAN IP address. *4
Specify the Subnet Mask of BMC LAN. *3 *4
Specify the Default Gateway IP address of the BMC LAN. *4
If you set this item, it is necessary for applying configuration information that
the gateway is connected on network.
Determine whether to enable/disable of Dynamic DNS. *5
Specify the DNS Server.
Specify the Host Name. *6
Specify the Domain Name. *7
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
Description
2. BMC Configuration
(1/2)
Default Value
Management LAN
Auto Negotiation
−
Disable
192.168.1.1
255.255.255.0
0.0.0.0
Disable
0.0.0.0
Blank
Blank
87