NEC Express 5800 Series Maintenance Manual page 71

Chapter 2 Useful Features
Serial Port A Settings
Serial Port A
Serial A Base I/O
Serial A Interrupt
Serial Port B Settings
Serial Port B
Serial B Base I/O
Serial B Interrupt
Console Redirection Settings
BIOS Redirection Port
Terminal Type
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
Continue C.R. after POST
Option
Disabled
[Enabled]
[3F8h]
2F8h
3E8h
2E8h
[IRQ 4]
IRQ 3
Disabled
[Enabled]
3F8h
[2F8h]
3E8h
2E8h
IRQ 4
[IRQ 3]
[Disabled]
Serial Port A
Serial Port B
[VT100+]
VT-UTF8
ANSI
9600
19200
57600
[115200]
7
[8]
[None]
Even
Odd
[1]
2
None
[Hardware RTS/CTS]
Disabled
[Enabled]
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
Parameter
−
Enables or disables serial Port A
Specifies the base I/O address for serial port
A.
Specifies the interrupt for serial port A
−
Enables or disables serial Port B
Specifies the base I/O address for serial port B
Specifies the interrupt for serial port B
−
Enables or disables the console redirection
feature for the specified serial port.
Specifying Serial Port A or Serial Port B
enables direct connection through terminal
unit, and options for connection shown below
are displayed.
Specifies the terminal type.
Specifies the baud rate.
Specifies the data bit width.
Specifies the parity type.
Specifies stop bits.
Specifies the flow control method.
Enables or disables the feature to continue
console redirection after completion of POST.
1. System BIOS
Description
−
−
−
[ ]: Factory setting
71