Executing Test - NEC Express5800 Maintenance Manual

Chapter １ Maintenance

8.2.3 Executing test

1. Select whether test is executed or not. If you execute test on SOL/Serial screen, select 1:Execute or If
you execute test on VGA screen, select OK button. The screen goes to Step 3.
If you do not want to execute test, select 2:Cancel. The screen moves to "8.2.4 Saving Logs".
***********************************************
Are you sure you want to execute the test?
***********************************************
1: Execute
2: Cancel
Enter selection [Execute]:
Confirm Execution (SOL/Serial)
2. Specify the execution time. If you want to change the default time, enter the desired time. The default
time changes depending on capacity of installed memory.
*********************************************************
Specify the execution time.
*********************************************************
Execution time [15min]: xx
Set Execution Time (SOL/Serial)
3. Test starts. If you execute the test on SOL/Serial screen, the execution status is displayed every 1
minute. If you execute the test on VGA screen, the execution status is displayed every 1 second.
*********************************************************
Start TeDoLi.
*********************************************************
Executing the test.
Execution Control:
Execution Time Limit: 2 minutes.
ElapsedTime:000:00:50
MEMORY Run / CPU1 Run / CPU2
031 ETH Run / 041 ETH Run / 042 ETH Run / 043 ETH Run
044 ETH Run / 081 ETH Run / 082 ETH Run / 091 ETH Run
092 ETH Run / 093 ETH Run / 094 ETH Run / USB DOM Run
DVD FAIL / SERIAL1 Run / VGA1
ElapsedTime:000:01:50
MEMORY Run / CPU1 Run / CPU2
031 ETH Run / 041 ETH Run / 042 ETH Run / 043 ETH Run
044 ETH Run / 081 ETH Run / 082 ETH Run / 091 ETH Run
092 ETH Run / 093 ETH Run / 094 ETH Run / USB DOM Run
DVD FAIL / SERIAL1 Run / VGA1
Execution Status (SOL/Serial)
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
56
Run / HDD1 Run
Run /
Run / HDD1 Run
Run /
8. System Diagnostics
Confirm Execution (VGA)
Set Execution Time (VGA)
Execution Status (VGA)