NEC Express5800 Maintenance Manual page 114

Chapter 3 Appendix
(2)
Error messages on a virtual LCD
On EXPRESSSCOPE Engine SP3 web browser window, you can confirm virtual LCD error messages. For
details of virtual LCD, refer to Chapter 3 (7.3 Server Panel) in User's Guide.
The table below shows the error messages displayed on virtual LCD, cause, and solution.
●
Messages displayed on virtual LCD
BIOS Message
on Upper LCD Line
XX POST Started...
XX BIOS Rev
XXXX
POST Completed
Successfully
BIOS Updater
Running
BIOS Recovery
Running
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
114
Cause
Displayed when POST starts.
Displayed while POST is running.
Displayed when POST completes normally.
Displayed while BIOS update is in progress.
Displayed while BIOS recovery is in
progress.
Message displayed on virtual LCD
Solution
This is not an error.
This is not an error.
This is not an error.
This is not an error. Wait until BIOS update
is completed.
This is not an error. Wait until BIOS
recovery is completed.
1. POST Error Message