NEC Express5800 Maintenance Manual page 23

Chapter １ Maintenance
1. Remove the media from the optical disk drive.
2. Power off the server (SYSTEM POWER LED goes off).
3. Unplug the power cord of the server from the power outlet.
4. Disconnect all the cables from the server.
5. Take the server out from the rack.
6. Pack the server securely to protect from damage, shock, and vibration.
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
Important If this server and internal optional devices are suddenly moved from a cold
place to a warm place, condensation will occur and cause malfunctions and
failures when these are used in such state. Wait for a sufficient period of time
before using the server and other components in the operating environment.
•
Check and adjust the system clock before operating after relocating or storing
Note
the server.
•
If the system clock time is significantly delayed or advanced over time in spite
of adjustment, contact your sales representative.
1. Transfer, Movement, and Disposal
23