NEC Express5800 Maintenance Manual page 112

Chapter 3 Appendix
Error Message
0006E012 NVRAM (SPI Flash) device register
error was detected when trying to
erase data.
0006E014 NVRAM (SPI Flash) SPI cycle
timeout was detected when trying
to erase data.
0006E016 NVRAM (SPI Flash) write
operation timeout was detected
when trying to
erase data.
0006E018 NVRAM (SPI Flash) verify error
was detected when trying to erase
data.
0001E314 CPU Internal Error was detected
(L0 I-Cache).
0001E315 CPU Internal Error was detected
(L0 D-Cache).
0001E316 CPU Internal Error was detected
(L0 Cache).
0001E317 CPU Internal Error was detected
(L1 I-Cache).
0001E318 CPU Internal Error was detected
(L1 D-Cache).
0001E319 CPU Internal Error was detected
(L1 Cache).
0001E31A CPU Internal Error was detected
(L2 I-Cache).
0001E31B CPU Internal Error was detected
(L2 D-Cache).
0001E31C CPU Internal Error was detected
(L2 Cache).
0001E31D CPU Internal Error was detected
(L3 I-Cache).
0001E31E CPU Internal Error was detected
(L3 D-Cache).
0001E31F CPU Internal Error was detected
(L3 Cache).
0001E338 CPU Internal Error was detected
(L0 I-Cache).
0001E339 CPU Internal Error was detected
(L0 D-Cache).
0001E33A CPU Internal Error was detected
(L0 Cache).
0001E33B CPU Internal Error was detected
(L1 I-Cache).
0001E33C CPU Internal Error was detected
(L1 D-Cache).
0001E33D CPU Internal Error was detected
(L1 Cache).
0001E33E CPU Internal Error was detected
(L2 I-Cache).
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
112
Cause
A device error (write error to HW
register) occurred while clearing
Flash ROM. (After that change
destination to backup area by fault
tolerant feature, and process is
ongoing.)
A timeout error occurred while
clearing Flash ROM. (After that
change destination to backup area
by fault tolerant feature, and process
is ongoing.)
A timeout error occurred while
waiting for completion of
clearing Flash ROM. (After that
change destination to backup area
by fault tolerant feature, and process
is ongoing.)
A verify error (default value is not
restored) occurred while clearing
Flash ROM. (After that change
destination to backup area by fault
tolerant feature, and process is
ongoing.)
An error was detected in CPU cache.
1. POST Error Message
Solution
Contact your service representative.