Save & Exit - NEC Express5800 Maintenance Manual

Chapter 2 Convenient Features
1.2.6 Save & Exit
If you move the cursor to Save & Exit, the Save & Exit menu appears.
The options of this menu are described below.
(a) Save Changes and Exit
The SETUP utility closes with all the changes saved in NVRAM (Non-volatile memory).
After the SETUP utility closes, the system automatically reboots.
(b) Discard Changes and Exit
The SETUP utility closes without saving the changes in NVRAM. The setting at startup of SETUP utility is
retained.
After the SETUP utility closes, the system automatically reboots.
(c) Save Changes
Changes are saved in NVRAM.
(d) Discard Changes
The changes are discarded and the settings are reset to the one at startup of SETUP utility.
(e) Load Setup Defaults
This option resets all values in the SETUP utility to the default settings.
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
•
Note The factory-set value may differ from the default value depending on server model.
Reconfigure parameters appropriate to your system environment by referring the
tables in this section.
•
Parameters of BIOS SETUP may be reset to factory setting value when hardware
component is replaced due to failure. If you change BIOS SETUP parameters, be sure
to backup the configuration information by using Backup/Restore feature of Remote
Management. Refer to Chapter 3 (7.7.3 Backup/Restore) in User's Guide for more
information.
1. System BIOS
93