NEC Express5800 Maintenance Manual page 80

Chapter 2 Convenient Features
(a) Add an Attempt submenu
On Add an Attempt submenu, the MAC address of ports of target network card are displayed.
For details about the options, see the table below.
Option
MAC xx:xx:xx:xx:xx:xx
If you select a port used for iSCSI boot and press the <Enter> key, a submenu to set parameter is displayed.
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
80
Parameter
– Displays MAC addresses of ports on network card
subject to iSCSI boot. Select a port and press the
<Enter> key to display submenu to set parameter.
Descriptions
[ ]: Factory settings
1. System BIOS