System Diagnostics; Test Items; Startup And Exit Of System Diagnostics - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
8.

System Diagnostics

System Diagnostics runs several tests on the server.
8.1

Test Items

The following items are tested in System Diagnostics.
• Memory
• CPU cache memory
• Hard disk drive
8.2

Startup and Exit of System Diagnostics

Start up System Diagnostics in the following procedure. (If the server is running, shut it down.)
1. Start up EXPRESSBUILDER and select Tool menu from Boot menu.
For information on starting up EXPRESSBUILDER, refer to Chapter 2 (6. Details of
EXPRESSBUILDER).
2. Select Test and diagnostics.
Important When executing the system diagnostics, be sure to disconnect the LAN cable.
Executing the system diagnostics with the LAN cable connected may affect the
network.
On checking hard disk drives, no data is written to the disk.
Tips
Note In case Language Selection menu appears, select English.
In Redirection mode, a message "Hit key to continue. [y|Y]" may appear. Press the <y> or
<Y> key.
Express5800/E120e-M Maintenance Guide
8. System Diagnostics
47