NEC Express5800 Series Maintenance Manual page 123

Chapter 3 Appendix
Message on Upper LCD
Line
System Configuration
change is detected
PCI Bus System Error
x (x: PCI slot number)
PCI Bus Parity Error
x (x: PCI slot number)
DIMM #x Uncorrectable
Error (x:DIMM number)
DIMM #x Correctable
Error
(x:DIMM number)
PCIx Slot
Uncorrectable Error
(x: PCI slot number)
PCI-Express
Uncorrectable Error x
(x: Onboard PCI
device number)
Messages displayed on a lower LCD line
BMC Message on Lower LCD Line
Processor1 Voltage Lower
Non-Critical
Processor1 Voltage Upper
Non-Critical
Processor1 Voltage Lower
Critical
Processor1 Voltage Upper
Critical
Processor2 Voltage Lower
Non-Critical
Processor2 Voltage Upper
Non-Critical
Processor2 Voltage Lower
Critical
Processor2 Voltage Upper
Critical
BaseBoard Voltage Lower
Non-Critical
BaseBoard Voltage Upper
Non-Critical
BaseBoard Voltage Lower
Critical
BaseBoard Voltage Upper
Critical
VBAT Lower Non-Critical
VBAT Upper Non-Critical
VBAT Lower Critical
VBAT Upper Critical
Cause
The CPU or memory configuration has
changed since the previous startup.
A system error was detected in PCI bus.
A parity error was detected in PCI bus.
Uncorrectable memory error was
detected.
A frequent occurrence of correctable
memory error was detected.
Uncorrectable error was detected on PCIe
bus of PCI card installed in PCI slot x.
Uncorrectable error was detected on PCIe
bus of onboard PCIe device.
Cause
A voltage abnormality was
detected.
Express5800/E120e-M Maintenance Guide
Solution
If this message appears even when no
configuration change has been made, contact your
sales representative
Contact your sales representative.
The error was corrected. You may continue
operating the server. If the same error occurs after
restart, contact your service representative.
Contact your sales representative.
Contact your sales representative.
Solution
Contact your sales representative.
1. POST Error Message
123