Resetting And Clearing The Server; Software Reset; Bmc Reset - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
7.

Resetting and Clearing the Server

Refer to this section if the server does not work or if you want to set BIOS settings back to the factory settings.
7.1

Software Reset

If the server halts before starting the OS, press <Ctrl> + <Delete> + <Alt> keys. This clears all the data in
progress in memory, and restarts the server.
7.2

BMC Reset

Press BMC RESET Switch only if a problem occurs in EXPRESSSCOPE Engine 3 (BMC).
Do not press BMC RESET Switch in usual operation.
To reset the BMC, press BMC RESET Switch at least five seconds. Remote management feature is disabled for
about 40 seconds after BMC is reset.
42
Note To reset the server when it is not frozen, make sure that no processing is in progress
Note If you press the BMC RESET Switch, do not shutdown, reboot the system, or perform any
switch operation for approximately 2 minutes.
BMC RESET Switch only resets BMC and that does not reboot the server.
Tips
Express5800/E120e-M Maintenance Guide
7. Resetting and Clearing the Server
BMC RESET switch