Chapter 2 Preparations
Installing a SAS or SATA drive
Install a hard disk drive by using the following procedure.
1.
See Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
Locate the slot where you install the hard disk drive.
Install hard disk drives in ascending order of port number.
2.
Remove the dummy tray.
Dummy trays are installed in every slot.
3.
Prepare the drive.
Unlock the handle of the tray.
4.
Hold the tray firmly and insert it into the slot.
192
Note
In the RAID System, use hard disk drives that have the same specifications
(capacity, rotational speed, and standard) for each Disk Array.
Note
Keep the removed dummy trays for future use.
Push it all the way until the handle's lock touches the frame.
Note
Hold the tray firmly with both hands.
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices