Table of Contents
Advertisement
Chapter 2 Preparations
(3)
To release the adhesion of the thermal grease, gently rotate the tool.
(4)
Unlatch the remaining corners of the processor assembly.
(5)
Separate the processor assembly from the heatsink.
The processor remains attached to the carrier.
6.
Using alcohol, remove thermal grease adhering to the processor.
Before new thermal grease adheres, dry the alcohol.
7.
Remove the dust cover of the high-performance heat sink.
8.
Align the pin mark 1 on the processor frame with the pin mark 1 on the high performance heat sink, gently
press the four corners of the processor frame from the top securing the heat sink latch on the high
performance heat sink and attach.
Heat sink latch
9.
Confirm the location of the processor, remove the processor socket protective cover.
10. Install the processor heatsink assembly:
①
Locate the Pin 1 indicator on the processor carrier and the socket.
72
Note
Do not touch the point of contact of the processor.
Pin 1 mark on heat sink
Note
Keep the removed protective cover for future use.
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
Heat sink latch
Pin 1 mark on frame
Advertisement
Table of Contents
