Chapter 2 Preparations
2.
Remove the air diversion component from the air baffle.
3.
Attach the appropriate retaining clip parts to the air baffle.
The locations of primary, secondary and tertiary are shown in the figure. Attach the clip parts according to
each configuration.
4.
Install the high performance heat sink. See Chapter 2 (1.10 High-performance CPU heat sink module
N8101-1286, 1U heat sink).
5.
Attach the air baffle. See Chapter 2 (1.33 Attaching the air baffle).
6.
Unfasten two screws securing the rear blank cover, and pull up the blank cover to remove it.
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
127