Table of Contents
Advertisement
Chapter 2 Preparations
7.
Fit the terminal of riser card to the slot on the mother board and insert the terminal firmly into the slot. Then
fix the riser card. Next, raise the screw handle at the top of cage and turn the handle to the right 180 degrees
to fix the cage. Then put down the screw handle as before.
8.
As shown in the diagram below, connect Front Disc BP and RAID Controller with SAS Cable.
112
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
