Table of Contents
Advertisement
Chapter 2 Preparations
2)
Slide Rail Kit for 2U N8143-129/130
(a) Installation
Mount the server to a rack in the following procedure.
1.
Pull out the left and right outer rails until they are completely locked to the front side.
2.
Hold the unit securely by two or more persons, and lift it to the height of the rack rail.
3.
Carefully install the device to the rail while confirming that the protrusion part of the device is correctly
inserted in the groove of the rail in the order of 1 → 2 → 3 → 4 on both sides of the outer rail.
4.
Press the lock release button on the side of the rail, and slowly push the device backward with the lock
released. Push the server until its lock on front panel clicks.
218
While more than one person is supporting the bottom part of the server,
Important
slowly pull out the server.
Do not apply pressure on the server from top when it is being pulled out.
Doing so cause the server to drop.
Important
Always install the server with two or more persons.
Express5800/R120h-2M (3rd-Gen) User's Guide
2. Installation and Connection
Advertisement
Table of Contents
