One-Time Boot - NEC Express5800 Series Maintenance Manual

Chapter 2 Useful Features
(a) NIC Configuration Menu
When you select System Configuration > (Embedded LOM) > NIC Configuration from the System Utilities,
the (Embedded LOM) menu appears.
For details about the options, see the table below.
Option
Link Speed
Wake On LAN
1.2.5

One-Time Boot

When you select One-Time Boot from the System Utilities or press the <F11> key on the POST screen, the
One-Time Boot menu appears.
You can select the UEFI boot device using the One-Time Boot menu.
Selecting this option does not change any predefined Boot Order settings.
The options are as below.
Option
OS boot manager such as
Windows Boot Manager
Generic USB Boot
Embedded LOM
Embedded UEFI Shell
Embedded SATA Port
Run the UEFI application from
the file system
Legacy BIOS One-Time Boot
Menu
128
Parameter
(Display only)
[Enabled]
Disabled
Parameter
-
-
-
-
-
-
-
Express5800/R120h-1E, R120h-2E Maintenance Guide
Description
Specifies the port speed used for the selected
boot protocol.
Enables power on of the system via LAN. Note
that configuring Wake on LAN in the operating
system does not change the value of this setting,
but does override the behavior of Wake on LAN in
OS controlled power states.
[ ]: Default setting
Description
Boots the installed OS.
Boots from the installed USB boot device.
Provides the placeholder of the USB device
bootable with UEFI.
By setting the boot order of this option, you can
retain the boot order when using the USB
device that may be installed in the future.
Boots from the boot device connected to
Embedded LOM.
Boots from Embedded UEFI Shell.
Boots from the boot device connected to
Embedded SATA Port.
Selects the UEFI applications that run from the
file system.
Shows all the FAT file systems available in the
system.
Launches Legacy BIOS One-Time Boot
Menu.
1. System Utilities