NEC Express5800 Series Maintenance Manual page 205

Chapter 3 Appendix
Error
Class
code
UEFI 3101
UEFI 3102
UEFI 3103
UEFI 3105
UEFI 120
UEFI 163
UEFI 209
UEFI 210
UEFI 211
UEFI 212
UEFI 213
UEFI 214
UEFI 215
Error message
Unbound Trusted Platform Module (TPM)
detected.
Unused Scalable Persistent Memory
backup device detected in Box %1
Bay %2. This device will be available for
operating system usage and will NOT be
used for Scalable Persistent Memory
backup.
NVDIMM Error: Unsupported NVDIMM-N
configuration detected. All NVDIMMs are
disabled.
Unsupported PCIe Card Configuration. The
PCIe device installed in Slot %1 is not
supported in the current location.
A Critical Error Event that has kept the
system from booting. -System Halted!
Time & Date Not Set.
Unsupported DIMM Configuration
Detected - Installed DIMM configuration
does NOT support configured AMP Mode.
System will operate in Advanced ECC
Mode. (Major Code:%1 Minor Code:%2).
Unsupported DIMM Configuration
Detected - Installed DIMMs could not
support the currently configured interleave
mode. (Major Code:%1, Minor Code:%2).
Unsupported DIMM Configuration
Detected - Processor %1 DIMM %2. The
DIMM does not support ECC. (Major
Code:%3, Minor Code:%4).
Processor UPI Initialization Error. A
processor UPI initialization error was
detected. %1 (Major Code:%2, Minor
Code:%3).
Unsupported DIMM Configuration
Detected - Processor %1 DIMM %2. The
DIMM has more ranks than is supported by
this system. (Major Code:%3, Minor
Code:%4).
Unsupported DIMM Configuration
Detected - Processor %1 DIMM %2. The
DIMM requires a frequency not supported
by the system. (Major Code:%3, Minor
Code:%4).
DIMM Initialization Error - Processor %1
DIMM %2. The identified processor and
memory failed to initialize properly. %3
(Major Code:%4, Minor Code:%5).
Express5800/R120h-1E, R120h-2E Maintenance Guide
Action
Action is not necessary. The TPM is integrated into the
unit after being cleared.
Confirm and set the Scalable Persistent Memory
backup device configuration properly.
If the problem persists, contact your sales
representative.
Referring to the user's guide, change the mounting
positions or number of DIMM.
In case a problem is not resolved, contact your sales
representative.
Referring to the user's guide, change the mounting
positions of PCIe Card.
In case a problem is not resolved, contact your sales
representative.
Contact your sales representative.
Set the date and time of the server.
For the details of the DIMM configuration required to
use the AMP mode, refer to the User's Guide.
If the problem persists, contact your sales
representative.
For the details of the DIMM configuration required to
use the interleaved mode, refer to the User's Guide.
If the problem persists, contact your sales
representative.
Remove the DIMM which was pointed out. For the
details of the DIMM configuration, refer to the User's
Guide.
If the problem persists, contact your sales
representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
1. IML Error Message
205