Displaying The Math Results; Disabling Math - HP 53131A Operating Manual

NOTE
Chapter 1 Getting Started
Making Measurements

Displaying the Math Results

Run
The Counter displays the modified measurement results, which are based
on the scale and offset values that you selected in the previous steps.
That is, the 101 represents the original 10, scale multiplied by 10, then
offset by 1.
(For more details and real applications of the Math Scale and Offset
operations, refer to the appropriate section in Chapter 2, "Operating Your
Universal Counter.")

Disabling Math

Scale &
Offset
Note that the Scale & Offset key indicator is now off.
Run
DO NOT cycle POWER because you will need to use these Scale and
Offset values in the following procedure "To Set Limits of Measurements."
Continue to the following procedure.
1-22
Freq Ch 2
Display 1, 7/13/92
Display 1, 7/13/92
Freq Ch 2
M
MHz
Gate
Operating Guide