To Wall Mount; To Mount On Concrete Or Mortat Walls - Panasonic EASA-PHONE KX-T61610 Installation Manual

The wall
where
the KX-T61610 is to be mounted must be able to support a weight of KX-T61610.
If
screws other
than the ones supplied are used, use the same-sized diameter screws as the enclosed ones.
------- _________ ----a--------------- ____
To Wall Mount:
1.
Place the templet (included) on the wall to mark
the 3 screw positions.
I
1
2. Install the 3 screws into the wall.
To Mount on Concrete or Mortar
Walls:
1.
Place the templet (included) to mark 3 screw
positions.
2. Drill 3 holes and drive the anchor plugs (in-
cluded) with a hammer, flush to the wall.
To the wall surface
Concrete Wall
3. Install the 3 screws into the anchor plugs.
Drive the screw
to this position.
3. Hook the unit on the screw heads.
4. Hook the unit on the screw heads.
2-3