Panasonic EASA-PHONE KX-T61610 Installation Manual page 189

1""'"
. .._.......__......_._....
--
[13] [A& &] [MEMORY] [END]
or t[SELECT]J
[13] [NEXT] [C] [MEMORY] [END]
;u
.----.-.-.---.u,ltil the desired memory location number appears
Description
Through programming, the desired extensions
will be allowed to dial the phone numbers which
are restricted by "Denied Code Assignment".
For service Class 2 or 3, up to 10 or 20 phone
numbers can be selected.
6.
Repeat steps 3
to 5.
7. To return to the initial programming mode,
press the END button.
Memory locations 00-09 are not restricted by Conditions
classes 2 and 3.
Memory locations lo-19 are not restricted'by
only class 2.
l
Each phone number should consist of 7 digits.
l
I'++" substitutes for a number.
Programming
1. Dial (13).
Programming Table
See page 38.
"ENTER CODE NO." will be displayed.
2. Dial the memory location number (00
through
19) or press the NEXT button.
3. Dial the 7-digit phone number.
*To erase a wrong entry, press the CLEAR
button.
4. Press the MEMORY button.
l
The MEMORY button indicator will be lit.
5. To advance to the next memory location num-
ber, press the NEXT button.
To go to a dqired memory location number,
press the SELECT button and dial the mem-
ory location number.
30
- _