Panasonic EASA-PHONE KX-T61610 Installation Manual page 66

Operation
To stop the printout;
1.
Dial (28).
2. Press the NEXT button.
3. Repeat pressing the SELECT button until
STOP OUTPUT is displayed.
4. Press the MEMORY button.
"STOP PRINTING !!" will be displayed.
When the System Parameters, Speed dial or All
Parameters is printed.
I. Dial (28).
:' ':.
"SYSTEM DATA OUT" will be displayed.
When the CO Parameter is printed;
1.
Dial (28).
2. Press the NEXT button.
3.
Repeat pressing the SELECT button until the
"CO PARA" is displayed.
4. Press the MEMORY button.
"ENTER CO NO" is displayed.
5. Dial the CO number.
SMDR printer will print out.
"PRINTING NOW' will be displayed.
6. To print the other CO parameter, press the
SELECT button
and then dial the CO
2. Press the NEXT button.
"MENU: SYSTEM PARA" will be dis-
played and "SYSTEM PARA" will blink.
number.
When the Extension
3. Repeatpressing the SELECT button until the
desired data dump mode is displayed.
1.
Dial (28).
2.
Press the NEXT
button.
4. Press the MEMORY button.
The LCD will stop blinking.
5. Repeat step 2 to 4, to print the other data
dumps.
3. Repeat pressing the SELECT button until rlze
"EXT PARA" is displayed.
Parameter is printed;
4. Press the MEMORY button.
"ENTER EXT NO" is displayed.
5. Dial the extension number.
SMDR printer will print out.
"PRINTING NOW" will be displayed.
6. To print the other extension parameter, press
the SELECT button and then dial the exterz-
sion number.
After completing printing, to return to the initial
mode;
1.
Press the END button.
Programming Table
See page 6-19. -'
3-43