Toshiba e-STUDIO453 Service Manual page 184

[B] Lower drawer feed sensor
(1) Take off the bypass unit (
(2) Take off the ADU (
(3) Remove the upper and lower drawers.
(4) Take off the front cover (
(5) Take off the front right cover
( Chapter 2.5.1 [B]).
(6) Take off the cleaner unit
( Chapter 11.6 [A]).
(7) Open the jam access cover.
(8) Release the latch and take off the transfer/
separation charger.
Note:
9
Be sure that the spring is inserted in 2 termi-
nals when assembling.
(9) Disconnect 3 connectors.
Note:
Hook the harness on the hook securely
when inserting the connector of the transfer/
separation charger.
(10) Disconnect the connector on the front side.
e-STUDIO350/352/353/450/452/453
PAPER FEEDING SYSTEM
Chapter 9.4 (A-1)).
Chapter 14.5 [A]).
Chapter 2.5.1 [A]).
9 - 18
Fig. 9-432
Fig. 9-433
Connector
Fig. 9-434
Connector
Fig. 9-435
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Jam access cover
Latch
Transfer/
separation charger
Hook