Options; E-Studio350/450 - Toshiba e-STUDIO453 Service Manual

1.3 Options

1

1.3.1 e-STUDIO350/450

Platen Cover
Reversing Automatic Document Feeder (RADF)
Drawer Module
Paper Feed Pedestal (PFP)
Large Capacity Feeder (LCF)
Finisher (Hanging type)
Finisher (Console type)
Finisher (Console saddle stitcher type)
Hole Punch Unit
Staple Cartridge
Bridge Kit
Job Separator
Offset Tray
Key Copy Counter
Work Tray
Damp Heater
Fax Board
2nd Line for Fax Board
Wireless LAN Adapter
PCI Slot
Scrambler Board
Printer Kit
Printer/Scanner Kit
Scanner upgrade Kit
Desk
Data overwrite kit
* 1) N : North America E : Europe
Notes:
1. The bridge unit (KN-3520) is necessary for installation of the finisher (MJ-1022, MJ-1023 or
MJ-1024).
2. The finisher (MJ-1023 or MJ-1024) is necessary for installation of the hole punch unit
(MJ-6004N/E/F/S).
3. The PCI slot (GO-1030) is necessary for installation of the scrambler board (GP-1030).
e-STUDIO350/352/353/450/452/453
SPECIFICATIONS
KA-3511 PC/PC-C
MR-3015
MY-1021 /-C
KD-1011 /-C
KD-1012 A4/LT/A4-C
MJ-1022 /-C
MJ-1023 /-C
MJ-1024 /-C
MJ-6004 N/E/F/S *1
STAPLE-1600 (for MJ-1022)
STAPLE-2000 (for MJ-1023/1024)
STAPLE-600 (for MJ-1024)
KN-3520 /-C
MJ-5004 /-C
MJ-5005 /-C
MU-8, MU-10
KK-3511
MF-3520 U/E
GD-1150 NA/AU/EU/TW/C/AS
GD-1160 NA/EU/TW/C
GN-1010
GO-1030
GP-1030
GM-1010
GM-2010
GM-3010
MH-1700
GP-1050
F : France S : Sweden
1 - 6 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
05/11