To Reduce The File Size By Changing The Options When Scanning The Original - Toshiba e-STUDIO2010AC Imaging Manual

5.4.1 To Reduce the File Size by Changing the Options when Scanning the
Original
• You can start with any of the procedures. But it is recommended to perform the procedures in order, as
listed below. You can perform one procedure in conjunction with another. But if this changes the image
quality more than required or loses the effectiveness of the adjustment, restore the settings made in
the previously performed procedure to the original ones. Then perform other procedures.
• Both the service technician and the user can perform this procedure. However, step (5) in the
procedure must be performed only by the service technician.
(1) When scanning the original, press [Scan Setting] on the Control Panel. Select a lower resolution in
the resolution option.
• "200 (dpi)" is selected from among the resolution options by default. Select a lower resolution
option (100 dpi or 150 dpi) to reduce the file size.
• This adjustment will have an effect on an image scanned in all color modes (Full color, Gray scale,
Black and Auto color).
After changing the resolution, scan the original and check the scanned-in image quality.
If further image quality adjustments are still necessary, perform other procedures.
(2) When scanning the original, press [Scan Setting] on the Control Panel. Select "Text" from among the
original mode options.
• Perform this adjustment, only if a black-and-white original containing no photo images is scanned
or if degradation in the photo image quality is acceptable.
• This adjustment will be effective, only if "Text/Photo" or "Photo" is initially selected from among the
original mode options.
• This adjustment will have an effect only on an image scanned in the Black mode.
After changing original mode, scan the original and check the scanned-in image quality.
If further image quality adjustments are still necessary, perform other procedures.
(3) When scanning the original, press [Scan Setting] on the Control Panel. Select "High" from among
the compression rate options.
• "Mid" is selected from among the compression rate options by default.
• This adjustment will have an effect only on an image scanned in the Full color mode (including the
Auto Color mode) or the Gray scale mode.
After changing the compression rate, scan the original and check the scanned-in image quality.
If further image quality adjustments are still necessary, perform other procedures.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
5.Scanning-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
5-7