Toshiba e-STUDIO2010AC Imaging Manual page 17

Paper type
Thick paper 1
Thick paper 2
Thick paper 3*
Transparency
Front
Special paper 1
Special paper 2
Recycled paper
Thick paper 4*
Black
Special paper 3*
Thick paper 1
Thick paper 2
Thick paper 3*
Special paper 1
Back
Special paper 2
Recycled paper
Thick paper 4*
Special paper 3*
• Front" refers to the printed side in the simplex mode or the side that is delivered facing upwards in
the duplex mode.
"Back" refers to the printed side that is delivered facing downwards in the duplex mode.
• The table below shows you the acceptable paper weight for the paper type.
Paper type
Plain paper
Thick paper
Thick paper 1
Thick paper 2
Thick paper 3*
Thick paper 4*
Thin paper*
* e-STUDIO2515AC/3015AC/3515AC/4515AC/5015AC only
• After adjusting the transfer roller bias output, perform automatic calibration in the same manner as
in procedure (1).
<Hint>
• The transfer voltage increases as the setting value is increased. It is usually recommended that
the setting value be increased, when you print on thick paper or paper with asperities on its
surface. On the other hand, the setting value should be decreased, when you print on thin paper.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
1.General Adjustments – Copying, Printing and e-Filing (Output from Box)
[05] code
Plain/Thick
paper
(OHP film)
05-2936
Thin paper*
Envelope
Plain/Thick
paper
05-2937
Thin paper*
Envelope
Acceptable paper weight
60 to 80 g/m²
81 to 105 g/m²
106 to 163 g/m²
164 to 209 g/m²
210 to 256 g/m²
257 to 280 g/m²
52 to 59 g/m²
1-5
Sub Recommended
code value
0
1
2
3
4
2 to 8
5
6
7
8
9
10
11
0
1
2
3
5
2 to 8
6
7
8
9
10
11
16 to 21 lb. Bond
22 to 28 lb. Bond
Max. 60 lb. Cover
Max. 110 lb. Index
Max. 140 lb. Index
Max. 100 lb. Cover
14 to 16 lb. Bond
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Acceptable
Default
value range
0 to 10 5
0 to 10 5