Toshiba e-STUDIO2010AC Imaging Manual page 45

Move the fuser unit guide rail upward
Front side
Rear side
The reproduction ratio in the secondary
scanning direction on the front side
becomes large.
e-STUDIO2515AC/3015AC/3515AC/4515AC/5015AC
Loosen 1 screw [1] on the fuser unit front guide rail. Remove 1 screw [2] and replace it in the
adjustment hole [3]. Move the fuser unit front guide rail up or down (one step).
• 0.5 mm scale [4]
© 2018 TOSHIBA TEC CORPORATION All rights reserved
1.General Adjustments – Copying, Printing and e-Filing (Output from Box)
Move the fuser unit guide rail downward
Front side
Rear side
The reproduction ratio in the secondary
scanning direction on the front side
becomes small.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
1-33
Before
adjustment
After
adjustment