Toshiba e-STUDIO2010AC Imaging Manual page 190

3.Printer-specific Adjustments
* 1 This is linked to the setting of [Smoothness Of Print] on the control panel.
* 2 This is available when 08-8110-1 is "1"
* 3 This is available when 08-8110-1 is "0"
* 4 This is available when 08-7310-1 is "0"
<Notes>
• When the setting is changed, be sure to perform automatic calibration.
 Caution after the adjustment
When the low screen ruling is set, jaggedness may appear on diagonal or curved lines. In this case,
check the printed image and then switch the setting if necessary
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-30