Toshiba e-STUDIO2010AC Imaging Manual page 154

2.Copier-specific Adjustments
• The setting content of the default value "0" is the same as that for the setting value of each original
mode as below.
Original mode
Text/Photo
Text
Red Seal Color
 Caution after the adjustment
This adjustment will affect to that for set at (3) in "2.12.1 To Adjust the Copy Image Quality of a Black
Logo". When performing this adjustment, pay attention to the balance against the reproduction level of
the black color logos, too.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
Setting value Original mode
3 Printed Image
4
3
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-100
Setting value
Photo
Map
3