Toshiba e-STUDIO2010AC Imaging Manual page 201

PCL XPS
PS
(1) Select [08 SETTING MODE]. Set "1" for code [9059].
• During automatic calibration, the paper type can be selected and image quality control will be
automatically performed.
Value for 08-9059
0
1
After setting the value, perform the next procedure.
PCL PS XPS
(2) Perform automatic calibration to correct variations in image density.
• A privilege to perform automatic calibration is set to Administrator by default but this can be
changed to the User. For how to change the privilege, refer to the MFP Management Guide.
• Perform each adjustment for 600 dpi and 1200 dpi.
• Use steps (a) through (k) to perform the automatic calibration.
(a) Press [User Functions -User-] on [Home] screen to enter the "User Functions" menu.
(b) Press [Admin].
(c) Enter an administrator password of 6 to 64 digits. Press [OK].
(d) Press [General].
(e) Press [Calibration].
(f) Press [600dpi Print] or [1200dpi Print].
(g) Press the button for the paper type to be corrected.
(h) Press [Default] to set the default calibration setting, or [Calibration] to adjust the calibration
setting.
• When you press [Default], the system maintains the default calibration setting for the selected
job type and returns to the previous screen.
• When you press [Calibration], a chart is printed out and the calibration guide illustration is
displayed on the control panel. Proceed to the next step.
(i) Place the paper type (A4/LT size) selected in (g) on the bypass tray.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
Mac
Operation switching at calibration
(displaying of a paper selection menu during automatic calibration)
No paper selecting buttons display
Paper selecting buttons displayed.(For both Copy and Printer)
Mac
3-41
3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC