Toshiba e-STUDIO2010AC Imaging Manual page 39

Pattern B for out-of-registration colors
Paper feeding direction
(7) Finely adjust the rotating speed of the fuser motor, in accordance with a pattern for the out-of-
registration colors.
Use steps (a) to (b) to perform the adjustment.
(a) Select code [4529]. Finely adjust the rotating speed of the fuser motor.
• Adjust the values in accordance with a pattern for the out-of-registration colors as shown in
the table below.
Pattern for
out-of-
[05] code
registration
colors
Pattern A
Pattern B
(b) Select code [104], and then press [TEST PRINT]. Check all the patches on the second page of
the printed test print pattern to check whether the misaligned colors have been improved.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
1.General Adjustments – Copying, Printing and e-Filing (Output from Box)
Patch eliminated at
the leading edge
Subcode
(Set a value smaller than
05-4529 4
(Set a value larger than the
1-27
Paper feeding speed
slower than
belt rotating speed
Recommended value
123 to 127
the current value)
129 to 133
current value)
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
transfer
Acceptable
Default
value range
0 to 255 128