Toshiba e-STUDIO453 Service Manual page 278

(3) Remove the screw and release the rear
latch.
[G] Opening /Closing lever
(1) Take off the ADU, ADU inside rear cover ,
ADU opening / closing switch, paper guide,
and ADU cover (
[E]).
(2) Remove 2 screws and take off the opening
/closing lever.
[H] ADU entrance sensor, ADU exit sensor
(1) Take off the ADU, ADU inside rear cover,
ADU opening / closing switch, paper guide,
14
and ADU cover (
[E]).
(2) Disconnect the connector and release the
latch to take off the ADU entrance sensor.
(3) Disconnect the connector and release the
latch to take off the ADU exit sensor.
e-STUDIO350/352/353/450/452/453
AUTOMATIC DUPLEXING UNIT
Chapter 14.5 [A] to 14.5
Chapter 14.5 [A] to 14.5
4 - 4
Rear latch
Fig. 14-513
Screw Opening / Closing lever
Fig. 14-514
ADU entrance sensor
Fig. 14-515
Fig. 14-516
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Screw
Connector
Connector
ADU exit sensor