Television And Vcr With Only Standard; Coaxial Antenna Input - Pioneer DBR-T200GB Instruction Book

Television and VCR with Only Stan-
dard Coaxial Aerial Input
DIGITAL TERRESTRIAL RECEIVER
CAUTION
230V
RISK OF ELECTRIC SHOCK
DO NOT OPEN
VIDEO
NOTE:
Before beginning to make connections, check the current wiring configuration because if the TV
and VCR are connected as shown above then the coaxial connection between them does not
need to be changed. This connection ensures your current channels can still be recorded.
Before making connections unplug all equipment
from the main power supply.
Connect the equipment as shown in the above dia-
gram but do not yet connect the antenna to the
digital receiver.
When you have finished making the connections,
plug in the equipment. First turn on the TV and
select an unused channel to use for watching digi-
tal programmes. Then turn on the VCR.
(At this time it does not matter to what channel the VCR is tuned.)
Now turn on the digital receiver using the main
power ON/OFF button on the front panel.
"--:--" will be displayed on the front panel.
MODEM
TV
RIGHT LEFT
SERIAL AUDIO COMMON INTERFACE
VCR
BASIC CONNECTIONS
AERIAL
CH 21-69
TV AERIAL
TV set
AERIAL
AERIAL
TV
EXIT
13
<BRB1056>