Pioneer DBR-T200GB Instruction Book page 37

Use the 5 (UP) or
available time slot, and then press the SELECT
button to display the Setting the Timer screen.
At this screen you are prompted to confirm the date, channel num-
ber, start time, end time, and programme status (once only, daily, or
weekly).
setup
timer 1
DON'T FORGET TO PROGRAM YOUR VIDEO
channel
start time
end time
recording repeat
choose a channel
back
Enter the date using the number buttons (0 to 9).
After the day and month have been entered the digital receiver will
automatically enter the year.
Four digits must be entered, so enter zeros where appropriate, such
as 1009 for the 10th of September.
Press the (DOWN) button to confirm the entry.
The channel number line will then be highlighted.
Enter the channel to be recorded.
NOTE:
If you do not know the number of the channel you want to record,
press the GREEN button to display the channel list, use the 5
(UP) or (DOWN) button to select the desired channel, and then
press the SELECT button to add the channel number to the Set
Timer screen.
(DOWN) button to select an
setting the timer
date 01.01
or
+ + :+ +
+ + :+ +
once only
confirm setting
select
<Setting the timer screen 2>
ADVANCED SETTINGS
<BRB1056>
37