NEC Express5800 Series User Manual page 123

Monitoring Configuration
Select "monitoring Configuration" on the Server menu and press Enter to display the following
screen.
Option
FRB-2 timer Disabled
[Enabled]
Boot Monitoring Disabled
5 minutes
[10 minutes]
15 minutes
20 minutes
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes
Option ROM Scan Disabled
Monitoring [Enabled]
Option ROM 1-[5]-20
Monitoring Time-out
POST Pause Disabled
Monitoring [Enabled]
POST Pause 1-[3]-20
Monitoring Time-out
Parameter
Select whether or not to enable the FRB-2 timer.
Select whether or not to enable the timer for boot
monitoring at startup. If you are starting up from an OS
with no NEC ESMPRO Agent installed, disable this
option. If you use Disaster Recovery Option for
ARCServe, select [Disabled].
Select whether or not to enable the function to monitor
the option ROM scan.
Set the timeout of the option ROM scan. This option is
displayed when the Option ROM Scan menu is set to
[Enabled] (unit: minute).
Set whether or not to enable the POST monitoring
function during boot pause.
Set the time for POST monitoring during boot pause.
This option is displayed when the POST Pause
Monitoring menu is set to [Enabled] (unit: minute).
System Configuration 4-25
Description
[ ]: Factory-set