28 Operation
When physical drive is selected (being hot-spare disk):
[Remove Hotspare]:
Release the setting as a hot-spare disk.
[Locate Physical Drive]:
Start to blink LED of Physical disk.
[Stop Locating Physical Drive]:
Stop to blink LED of Physical disk.
When physical drive is not used yet:
[Locate Physical Drive]:
Start to blink LED of Physical disk.
[Stop Locating Physical Drive]:
Stop to blink LED of Physical disk.
[Make Global Hotspare]:
Create a Global hot-spare disk.
[Make Dedicated Hotspare]:
Create a hot-spare disk operating only for the specified array.